Keystone has a bunch more options for "test points".
https://www.keyelco.com/category.cfm/keyelco/Test-Points-Tips-Probes-Clips/=
id/518

Would one of the through-hole or surface mount loop terminals on the board
and a test clip on the wire work for you?


On Thu, Feb 21, 2019 at 10:47 AM Neil <picdude3@narwani.org> wrote:

> Hi,
>
> I'm having issues finding a small 1-position board-to-wire connector for
> use as a test lead on a custom product.  It needs to be small, and
> accept 20-gauge wire (or 18 gauge).  And I will use 3 side-by-side, and
> have about 20-21 mm width for it.
>
> My first thought was to use a 2mm banana jack, but for whatever reason,
> the 2mm jacks and plugs I'm finding don't fit each other, other than say
> matched sets from companies like Pomona, which gets quite pricey.  And
> they're still wide anyway.
> Common 0.1"-spacing headers with wires on dupont connectors would've
> been great if only they could've accepted 20-gauge wire.  If someone
> makes something similar with say 0.15" spacing, I think it would be ideal=
..
>
> I'm currently investigating this, but I'd have to cut off the side
> locking tabs... *cringe*.  And not sure how secure the connectors will
> be without them.  Perhaps the 3-position header can accept 3 separate
> 1-position plugs?  Will have to experiment.
>
> https://www.digikey.com/product-detail/en/te-connectivity-amp-connectors/=
1-794374-1/A130985-ND/1860852
>
> I'm also looking at using test points like this, but the solder tab at
> the end may make mounting in an enclosure with the jack easily
> accessible challenging...
>
> https://www.digikey.com/product-detail/en/keystone-electronics/6050/36-60=
50-ND/316474
>
> Surely someone makes a workable option?  Any thoughts?
>
> Thanks,
> -Neil.
>
>
>
> --
> http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>
--=20
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.