Just guessing with the chemical specs, a extra hot solder pot with an=20
inert shield gas ought to do it. Cold enough to not melt the copper, hot=20
enough to float/destruct the polyester. The shield gas keeps the copper=20
from oxidizing.

On 1/11/2019 10:04 PM, smplx wrote:
> On Thu, 10 Jan 2019, Joe Mc Cauley wrote:
>
>> Chemical stripping is what I have used many years ago (Eccostrip from
>> Emerson & Cuming). That's no longer available here. Nor are any
>> strippers containing methylene chloride. I was looking at something
>> called dip strip
>> (https://www.eraser.com/products/replacement-parts/dip-strip/) which
>> seems to require a hot pot to use. However even this appears unavailable
>> apart from the US & Asia.

--=20
John Ferrell W8CCW
    Julian NC 27283
  It is better to walk alone,
than with a crowd going the wrong direction.
                   --Diane Grant

--=20
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.