An overview of PICKit+ by the Developer https://www.youtube.com/watch?v=3D_1ocK39FRwg&feature=3Dyoutu.be On Thu, 20 Sep 2018 at 17:45, Harold Hallikainen wrote: > I've been using a PICkit3 for several years with no issue. I've also made > use of the "code to go" feature to send out updates for the rare occasion > where a bootload did not work. I have a couple Real ICE units that refuse > to work. One thing on PICkit 3 that caused me frustration for a while is > for debug (this is on MPLAB 8), there is not a warning that you have to > authorize write to protected boot memory. Instead, it just does not work. > I finally noticed that I had to enable writing to boot memory separately. > The full chip programming option would not work. > > Harold > > > > -- > FCC Rules Updated Daily at http://www.hallikainen.com > Not sent from an iPhone. > -- > http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive > View/change your membership options at > http://mailman.mit.edu/mailman/listinfo/piclist > --=20 http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist .