Use vacuum to remove maybe?


On 15/07/2018 7:31 AM, Jason White wrote:
> Hello All,
>
> A 1/8" steel ball bearing has fallen to the bottom of a 2.5" deep 5/64"
> hole in a large iron casting.
>
> It is feasible to use magnetics to remove the bearing?
>
> I suspect not but perhaps it is a failure of my imagination.
>
>
> The hole is the oil passage to the spindle bearing of a small lathe. The
> ball is blocking oil from entering the spindle bearing and must be remove=
d.
>
> The ball bearing is loose in the passage. If I could flip the lathe upsid=
e
> down it would probably fall out of the hole.
>
> Currently it seems I will have to tear the lathe apart to get the ball ou=
t.
>
> Thanks,
> Jason White

--=20
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.