Thta's rather favourable...

On 13 July 2018 at 11:47, Vicent Colomar Prats <vicentecolomar@gmail.com>
wrote:

> I found this small comparative with an Arduino:
> https://www.bitsnblobs.com/blog/pic16f18446-vs-arduino-
> uno-overview-speed-comparison/
>
>
> Missatge de Mark E. Skeels <meskeels@gmail.com> del dia dl., 9 de jul.
> 2018
> a les 17:13:
>
> > All,
> >
> > I am using this Eval board. I soldered a straight pin connector to the
> > pads on the bottom of the pcb and after updating my Picket 3 firmware I
> > have been able to take the original project (MPLab light?) and export i=
t
> > for regular MPLab.
> >
> > Everything works fine.
> >
> > Mark
> >
> >
> > On 7/9/2018 9:44 AM, AB Pearce - UKRI STFC wrote:
> > >> To debug in the classic way (using the hardware programmer in Mplabx=
)
> > you should dig for more info, I can not help at the momment.
> > > The information in the Sensor Board User Guide that goes with the 184=
46
> > X-Press board implies that you can do conventional debug with MPLAB-X.
> > Presumably this needs to be the latest version, but they do have other
> > X-press boards that are useable in the same way.
> > >
> > >
> > >
> > >
> >
> > --
> > Skeels Technical Services
> > 9714 Norman Ave.
> > Machesney Park, IL 61115
> > call or text me at 815-979-6705
> >
> > --
> > http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
> > View/change your membership options at
> > http://mailman.mit.edu/mailman/listinfo/piclist
> >
> --
> http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>



--=20
Clint. M0UAW IO83

*No trees were harmed in the sending of this mail. However, a large number
of electrons were greatly inconvenienced.*
--=20
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.