All,

I am using this Eval board. I soldered a straight pin connector to the=20
pads on the bottom of the pcb and after updating my Picket 3 firmware I=20
have been able to take the original project (MPLab light?) and export it=20
for regular MPLab.

Everything works fine.

Mark


On 7/9/2018 9:44 AM, AB Pearce - UKRI STFC wrote:
>> To debug in the classic way (using the hardware programmer in Mplabx) yo=
u should dig for more info, I can not help at the momment.
> The information in the Sensor Board User Guide that goes with the 18446 X=
-Press board implies that you can do conventional debug with MPLAB-X. Presu=
mably this needs to be the latest version, but they do have other X-press b=
oards that are useable in the same way.
>
>
>
>

--=20
Skeels Technical Services
9714 Norman Ave.
Machesney Park, IL 61115
call or text me at 815-979-6705

--=20
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.