Eh? It takes micro-B, and to use it you simply plug it in to your computer, and drop your .hex file onto the (ramdisk type) directory that shows up in your filesystem. How one uses the eDBG features, though, is beyond me. On 6/28/18, Ryan O'Connor wrote: > I also got one of those tiny boards. But how do I use it? There seems to = be > a usb-type plug but I don't have any cables which fit it. > > Ryan > > On Fri, 29 Jun 2018 at 06:45, Harold Hallikainen > > wrote: > >> >> > I have yet to get around to playing with it, but the aspect that >> intrigued >> > me was >> > the programmer is supposed to act as a storage device and mount as a >> > drive. >> > Supposedly it is programmable by saving a new hex file. >> > >> >> That's interesting! Doesn't do much for debug, though. The bootloaders >> I've written all take the hex file directly. Some take it as an HTTP pos= t >> where it's parsed to a binary image for the chip, saved in external >> flash, >> then copied back to internal flash. Others accept the hex file over UART >> or SPI, then parse and write directly to internal flash. This is great >> for >> field updates, but, of course, does not support debug. >> >> Harold >> >> >> >> -- >> FCC Rules Updated Daily at http://www.hallikainen.com >> Not sent from an iPhone. >> -- >> http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive >> View/change your membership options at >> http://mailman.mit.edu/mailman/listinfo/piclist >> > -- > http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive > View/change your membership options at > http://mailman.mit.edu/mailman/listinfo/piclist > --=20 If you're in my band you can't have too much of a sense of dignity. -- "Weird Al" Yankovic --=20 http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist .