I was interrupted and accidentally cut off my message=20

And to get an accurate reading you need to do the temperature calculations.=
 I decked that while the BMP 180 might be an industry standard there are ot=
her sensors that will do the temp compensation in hardware=20

I was able to read the values Ok the issue was in doing the compensation ca=
lculations=20

Roger

Sent from my iPhone

> On Mar 20, 2018, at 10:17 AM, Bob Blick <bobblick@outlook.com> wrote:
>=20
> Hi Jim,
>=20
> Were you able to find any examples on the web for PIC? If not, you could =
get the BMP180 library for Arduino and port it or just see what they are do=
ing so you can fix your code.
>=20
> Bob
> ________________________________________
> From: piclist-bounces@mit.edu <piclist-bounces@mit.edu> on behalf of jim@=
jpes.com <jim@jpes.com>
> Sent: Tuesday, March 20, 2018 9:15 AM
> To: piclist@mit.edu
> Subject: [PIC]: I2C Communications With A BMP180 Temperature/Pressure/Alt=
itude  Sensor
>=20
>=20
> All,
>=20
> Does anyone have any experience with this sensor?   I have tried
> getting the temperature and pressure
> conversions to work, but I'm having no luck so far.  I am using
> MikroCPro for PIC compiler with the I2C
> library. to write my program.  I can get the unit ID and the
> calibration data from EEPROM.  But no matter
> what I do, I cannot get the temperature or pressure values.
> I've looked on the web for examples, and I'm believe I'm doing
> everything correctly.  I was just
> wondering if there is something that I'm missing.  If anyone has any
> ideas, please let me know.
>=20
> Thanks all,
>=20
> Regards,
>=20
> Jim
>=20
>=20
> --
> http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>=20
> --=20
> http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist


--=20
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.