I soaked a piece in camping fuel for a few hours and the adhesive scraped o= ff in one pass with a credit card. The piece that had goo-gone on it showed= promise also after sitting for a few hours. Thanks for all the help - maybe someone else will find the info useful. Bob ________________________________________ From: piclist-bounces@mit.edu on behalf of Ryan O= 'Connor=20 Sent: Thursday, December 7, 2017 3:49 PM To: Microcontroller discussion list - Public. Subject: Re: [EE] Stripping Kapton tape adhesive How many do you have to do? Just use the gas and scrub hard if it's just a few. If you need lots try the specialized super glue solvents which can break down dried super-glue to a limited extent. Ryan On 8 December 2017 at 11:49, enkitec wrote: > > I have used benzine to remove adesives. > > Mark Jordan > > > On 07-Dec-17 19:35, Bob Blick wrote: > > Goo-Gone didn't work. Carb cleaner and brake cleaner didn't work. > Gasoline made a small effect if I rubbed hard. This is a very durable > adhesive. > > > > I might soak some tape in camping fuel for a while and see how that > works. > > --=20 http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist .