There may be, I've usually just rolled my own routines to service the
EUSART though I haven't used the '4520 specifically.

 I don't think there are huge differences between most EUSART enabled mid
range devices so there should be plenty of example code to examine and
modify for your needs.

You'll need a level translator if you're going PIC to PC directly.

On 14 Nov 2017 12:36, "Richard Pope" <mechanic_2@charter.net> wrote:

> Clint,
>      Yes, I am using a FTDI to RS232 converter to hook the PC to the
> PIC. I just found out that all that I need to do is treat the connection
> to the PIC as a Serial connection. Is there a MC Serial Library
> available? I'm the one that was confused.
> Thanks,
> rich!
>
> On 11/14/2017 6:28 AM, Clint Jay wrote:
> > I'm a little confused but the way I read your message would suggest tha=
t
> > you're going to connect your PIC to the PC with an FTDI USB to serial
> > device?
> >
> > Or have I misunderstood and you're hoping to connect the PIC to the FTD=
I
> > with USB?
> >
> > On 14 Nov 2017 12:25, "Richard Pope" <mechanic_2@charter.net> wrote:
> >
> > HELLO ALL,
> > . . . . I could really use some help with using USB on the PIC 18F4520.
> > I am going to use a FTDI USB to RS232 converter to talk to the PIC
> > 18F4520 Through the RX and TX Pins. I want to send Configuration Code t=
o
> > a 24C512 serial EPROM. When I add additional devices I want to be able
> > to update the EPROM. I also want to be able to use a Win 8.1 64bit Pro
> > PC to control the Programmer. I also do a lot of searching and research
> > on materials that I acquire from the MicroChip website. I have been
> > reading the MC USB Device Firmware Framework User's Guide.
> >    . . . . I have the latest version of MpLab, and the latest versions =
of
> > the X8, X18, and X32 Compilers installed. I also see that I need to
> > install the latest versions of C30 C and C18 C Compilers and setup the
> > proper Paths for these files. I don't mind doing the footwork. I am
> > Disabled and retired. This gives me a lot of free time.
> > Thanks,
> >
> > Richard R. Pope
> > 1230 19th Street #5
> > Reedsburg, WI 53959, USA
> > 1-608-768-7448
> > mechanic_2@charter.net
> >
> >
> > ---
> > This email has been checked for viruses by Avast antivirus software.
> > https://www.avast.com/antivirus
> >
> > --
> > http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
> > View/change your membership options at
> > http://mailman.mit.edu/mailman/listinfo/piclist
>
> --
> http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>
--=20
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.