>
> current the on board regulator can supply.  Several props have
> electromagnets and automotive relays being powered from the same wall
> adapter using a fair amount of logic level mosfets with the gates directl=
y
> driven by Arduino output pins.  So far reliability has been very good.
>

It is refreshing to hear this as the owner had concerns about arduino
reliability.  I think you were more referring to the PSU but they are
connected.

I am only using one and did the regulator test while it was powering 4 RFID
readers and 1 ESP8266 and as I suspected was too much for the onboard
regulator.
--=20
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.