Hi Bob! On Thu, Mar 16, 2017 at 2:01 PM, Bob Blick wrote: > I would not use that MOSFET with 3 volt gate drive. Its worst-case spec s= hows 250uA drain current at 3 volts gate. > > But there is considerable variation between lots. If you are just buildin= g a one-off, give it a try. That was my thought as well. It is a one off, but I might as well plan for a proper part. I'm not ordering tens of thousands of these, so a few bucks spent on a better part is worth it to me. > Otherwise use something like the AO3416, I've been very happy with that p= art. Sounds good, I will check that out! Thanks! Josh --=20 A common mistake that people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools. -Douglas Adams --=20 http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist .