I knew I've seen that scallop pattern somewhere. It is an ODU mini- snap connector On 2 November 2016 at 11:56, Dave Lagzdin wrote: > EEG.1B.306 would get you a rear mount tho' flats on the nut don't seem to > be a lemo thing. > > On 2 November 2016 at 11:40, Dave Lagzdin wrote: > >> Scallop is wrong for a lemo but expect it is one of the compatible clone= s >> FGG.1B.306 for a starting point (9mm=3D1B size) >> >> On 27 October 2016 at 21:36, Jesse Lackey >> wrote: >> >>> Hi all! I have a connector I can't find... but seems like it should be >>> reasonably common. I probably am just missing it. This is for a >>> footpedal accessory for medical gear designed in Germany, if it matters= .. >>> >>> Cable end side, male pins, keyed, 9mm diameter: >>> >>> >>> >>> Panel mount side, female socket: >>> >>> >>> What would be best is finding both at mouser/digikey/newark etc. But >>> I'll take anything orderable, i.e. in stock and orderable by a normal >>> human in the USA. >>> >>> Prize: the person with the first correct response for either end gets >>> $10 in bitcoin.... and $10 for the first correct response for the other= .. >>> Find both first and get $25! extra bonus! Wheee!! >>> (time measured by the "date" in the message header in piclist.) >>> >>> Thanks all! >>> J >>> >>> >>> >>> >>> -- >>> http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive >>> View/change your membership options at >>> http://mailman.mit.edu/mailman/listinfo/piclist >>> >> >> > --=20 http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist .