EEG.1B.306 would get you a rear mount tho' flats on the nut don't seem to be a lemo thing. On 2 November 2016 at 11:40, Dave Lagzdin wrote: > Scallop is wrong for a lemo but expect it is one of the compatible clones > FGG.1B.306 for a starting point (9mm=3D1B size) > > On 27 October 2016 at 21:36, Jesse Lackey > wrote: > >> Hi all! I have a connector I can't find... but seems like it should be >> reasonably common. I probably am just missing it. This is for a >> footpedal accessory for medical gear designed in Germany, if it matters. >> >> Cable end side, male pins, keyed, 9mm diameter: >> >> >> >> Panel mount side, female socket: >> >> >> What would be best is finding both at mouser/digikey/newark etc. But >> I'll take anything orderable, i.e. in stock and orderable by a normal >> human in the USA. >> >> Prize: the person with the first correct response for either end gets >> $10 in bitcoin.... and $10 for the first correct response for the other. >> Find both first and get $25! extra bonus! Wheee!! >> (time measured by the "date" in the message header in piclist.) >> >> Thanks all! >> J >> >> >> >> >> -- >> http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive >> View/change your membership options at >> http://mailman.mit.edu/mailman/listinfo/piclist >> > > --=20 http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist .