On 20 Oct 2016 at 21:50, Van Horn, David wrote:>=20
> Wire a 6V relay so that the normally closed contacts are in series
> with the relay. Now add a shielded cable of about a meter, and
> connect the shield to the battery side of the contacts, and the
> center conductor to the coil side through a good capacitor that can
> take some current, 0.1uF or thereabouts, and on the other end,
> fabricate a small coil of 10-30 turns.   Add a pushbutton in series
> with the battery, and you have "Angry Bees".=20
>=20
> The pulses of current through the coil have significant energy, and
> you can then probe around your system to see what's "sensitive".=20

Excellent, thanks for sharing.


--=20
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.