Hi Everyone,

A colleague recommended sending this question to Piclist.  I've written abo=
ut it in detail on the Microchip forum.  You can find the related posts at
http://www.microchip.com/forums/FindPost/920077
http://www.microchip.com/forums/FindPost/920293

The basic summary is that I'm unable to get sleep or deep sleep current on =
this part below 10s of mA.  Current drops to hundreds of microamps when I h=
old the part in reset.  Since IO seems the most likely culprit, in addition=
 to double and triple checking IO configuration I've also tried an experime=
nt where I cut out every IO pin from the board.  I didn't see any change in=
 current draw during sleep mode, even after cutting all IO pins other than =
power, ground and reset.

Please let me know if you have any suggestions about other things I should =
try.

Thanks!

--=20
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.