Sorry, I've made a mistake in my 16F88 fuses used :=20
Here are the ones I 'try' to use without success:=20

__CONFIG( FOSC_INTOSCIO & DEBUG_ON & LVP_OFF & WDTE_OFF & PWRTE_OFF &
BOREN_OFF & CP_OFF & MCLRE_ON );=20

I'm using MPLAB v8.9 and Hitech PRO v9.83=20
and I checked many times the fuse's names in the 16F88.h file=20
and they are correct.=20
So does anybody have a simple 16F88 project to show=20
that it can work in debug using 8mhz internal clock (freeing RA6, RA7 pins)=
=20
... Like a C listing with a PDF schematic file of what is connected to that
PIC ?=20
Lots of people say it works but there are no practical setup=20
to try that these people did.=20
Please some workin examples..=20
Many thanks !=20



--
View this message in context: http://microcontrollers.2385.n7.nabble.com/PI=
C16F88-debugging-using-internal-oscillator-issue-tp198964p198978.html
Sent from the MicroControllers - PIC mailing list archive at Nabble.com.
--=20
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.