Much appreciated.

Cheers,
-Neil.



On 10/21/2015 11:47 PM, Brent Brown wrote:
> Hi Neil,
>
> The courses do look different, but I'm sure either one will be helpful. Y=
our
> Mikromedia PIC32MX4 board seems to use mostly identical LCD connections a=
s
> the newer Mikromedia for PIC32 board, just the backlight LED is driven fr=
om a
> different pin. I imagine it's the same size (2.83") and so very likely th=
e same part.
>
> The graphics workshop included a Harmony BSP (Board Support) file specifi=
cally
> made for the Mikromedia PIC32 board to make things easier in the labs. It=
 may not
> be too hard to modify it and get your LCD going, on the other hand it mig=
ht be :-)
>
> Will send you a link to notes/lab excercises etc in case you want to go d=
own that
> path, or just compare.
>
> On 21 Oct 2015 at 19:52, Neil wrote:
>
>> Hi Brent,
>>
>> Awesome, thanks.
>> I did find this today, which looks like it should make things a bit
>> easier -- full downloadable presentation, code, etc from the Masters
>> 2015 graphics/harmony course...
>> https://microchip.wikidot.com/harmony:middleware-graphics-training
>>
>> I won't be surprised if this is the same or similar to the course you to=
ok.
>>
>> My Mikromedia board is an old one, but so far I found one vague
>> reference to it being ILI9341, so fingers crossed...
>> http://www.mikroe.com/multimedia/pic32mx4/
>>
>> Cheers,
>> -Neil.
>>
>>
>> On 10/21/2015 7:06 PM, Brent Brown wrote:
>>> Hi Neil,
>>>
>>> One place the graphics controllers are listed is in MPLAB X (must have =
Harmony
>>> installed, and a project configured to use it)...
>>>
>>> Tools > Embedded > MPLAB Harmony Configurator
>>>
>>> + Harmony Framework Configuration + Drivers + Graphic Controllers
>>>
>>> LCC
>>> OTM2201a
>>> SSD1926
>>> SSD1289
>>> S1D13517
>>> TFT002
>>> ILI9341
>>>
>>> Alternative option is "Graphic Displays", which gives preconfigured set=
ups for a
>>> handful of known displays and has an option for a custom display.
>>>
>>> There weren't any slide/presentation notes as such, think they were goi=
ng to send
>>> something out later. The lab notes are good though, will see what I can=
 send you,
>>> and perhaps it can be tweaked to work with your Mikromedia board.
>>>
>>> On 21 Oct 2015 at 12:55, Neil wrote:
>>>
>>>> So jealous of this now, as I just started back tinkering with MPLABX,
>>>> XC32, Harmony specifically to use the graphics libraries. More
>>>> coincidentally, I dug up an older  Mikromedia MX4 dev board I've had f=
or
>>>> some time -- it uses the same PIC32MX460F512L chip.
>>>>
>>>> Curious -- where do I find the list of graphics controllers Harmony
>>>> supports?  Also, are the slides/presentations from this course availab=
le
>>>> anywhere online that I can see them?
>> --=20
>> http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
>> View/change your membership options at
>> http://mailman.mit.edu/mailman/listinfo/piclist
>>
>
>

--=20
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.