David and et al,
     Success, success!! I commented out the cursor position line and I=20
just left the print character 'a' line. I have an a on the LCD. I really=20
appreciate all of the help everybody.
Thanks a bunch,
rich!

On 10/23/2015 4:02 AM, David Duffy (AVD) wrote:
> Also add this line at the top of the main function:  ADCON1 =3D 0x0F;
>
> This will disable the analog inputs.  The data sheet says analog won't
> override a pin set as output, but I'd add that line to make sure.
> David...
>
> On 23/10/2015 6:48 PM, Richard R. Pope wrote:
>> Alan,
>>        I probably have but I can't find it. This PIC is a lot more
>> complicated than a 16f84a. So I have turned to you folks for help and
>> guidance. I have poured through the datasheets and the code over and
>> over. I suspect that when we find it it will be one of those ah, how did
>> I ever miss that?
>> Thanks,
>> rich!
>>
>> On 10/23/2015 3:38 AM, alan.b.pearce@stfc.ac.uk wrote:
>>> I haven't the time to look through your code, but I am wondering if you=
 have messed up the RA port initialisation so that the rs pin is open colle=
ctor without a pullup.
>>>
>>>
--=20
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.