James and et al,
     The code is posted on pastebin.com. Here is the link to it:=20
http://pastebin.com/VhpXvqaQ.
Thanks,
rich!

On 10/23/2015 2:38 AM, Richard R. Pope wrote:
> James,
>       I understand. I'm going to post the code in a couple of minutes.
> Thanks,
> rich!
>
> On 10/23/2015 2:27 AM, James Cameron wrote:
>> As r/s line never goes high, work on that.  LCD_Send_data requires it
>> to go high in order to clock data out.  It's the cause of the LCD
>> ignoring you.
>>
>> I suggest writing a new program just to set r/s high, and test it
>> against your LEDs.
>>
>> Pastebin won't have a trouble with a large C program.  It won't be
>> private.  Don't use it if you don't mind others seeing it, but as
>> you're posting to PIClist you should already be fine with that.
>>
>> As for compression, don't worry about it.  As long as you have a
>> modern web browser, it will handle compression for you.
>>
>> On Fri, Oct 23, 2015 at 01:32:57AM -0500, Richard R. Pope wrote:
>>> James,
>>>        I just finished installing the LEDs. I increased wait(); to abou=
t 2
>>> seconds instead of about 20ms. The e line goes high and low. The r/w
>>> line goes high and low. The r/s line never goes high. Can I zip the cod=
e
>>> and put it into pastebin? I have never used it before. We could go
>>> private but then others will miss out on what we are doing here.
>>> Thanks,
>>> rich!
>>>
>>>
--=20
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.