Hi Neil,

The courses do look different, but I'm sure either one will be helpful. You=
r=20
Mikromedia PIC32MX4 board seems to use mostly identical LCD connections as=
=20
the newer Mikromedia for PIC32 board, just the backlight LED is driven from=
 a=20
different pin. I imagine it's the same size (2.83") and so very likely the =
same part.

The graphics workshop included a Harmony BSP (Board Support) file specifica=
lly=20
made for the Mikromedia PIC32 board to make things easier in the labs. It m=
ay not=20
be too hard to modify it and get your LCD going, on the other hand it might=
 be :-)

Will send you a link to notes/lab excercises etc in case you want to go dow=
n that=20
path, or just compare.

On 21 Oct 2015 at 19:52, Neil wrote:

> Hi Brent,
>=20
> Awesome, thanks.
> I did find this today, which looks like it should make things a bit=20
> easier -- full downloadable presentation, code, etc from the Masters=20
> 2015 graphics/harmony course...
> https://microchip.wikidot.com/harmony:middleware-graphics-training
>=20
> I won't be surprised if this is the same or similar to the course you too=
k.
>=20
> My Mikromedia board is an old one, but so far I found one vague=20
> reference to it being ILI9341, so fingers crossed...
> http://www.mikroe.com/multimedia/pic32mx4/
>=20
> Cheers,
> -Neil.
>=20
>=20
> On 10/21/2015 7:06 PM, Brent Brown wrote:
> > Hi Neil,
> >
> > One place the graphics controllers are listed is in MPLAB X (must have =
Harmony
> > installed, and a project configured to use it)...
> >
> > Tools > Embedded > MPLAB Harmony Configurator
> >
> > + Harmony Framework Configuration + Drivers + Graphic Controllers
> >
> > LCC
> > OTM2201a
> > SSD1926
> > SSD1289
> > S1D13517
> > TFT002
> > ILI9341
> >
> > Alternative option is "Graphic Displays", which gives preconfigured set=
ups for a
> > handful of known displays and has an option for a custom display.
> >
> > There weren't any slide/presentation notes as such, think they were goi=
ng to send
> > something out later. The lab notes are good though, will see what I can=
 send you,
> > and perhaps it can be tweaked to work with your Mikromedia board.
> >
> > On 21 Oct 2015 at 12:55, Neil wrote:
> >
> >> So jealous of this now, as I just started back tinkering with MPLABX,
> >> XC32, Harmony specifically to use the graphics libraries. More
> >> coincidentally, I dug up an older  Mikromedia MX4 dev board I've had f=
or
> >> some time -- it uses the same PIC32MX460F512L chip.
> >>
> >> Curious -- where do I find the list of graphics controllers Harmony
> >> supports?  Also, are the slides/presentations from this course availab=
le
> >> anywhere online that I can see them?
>=20
> --=20
> http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>=20



--=20
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.