Tom, I do not know how goes things in the US.
What I can tell you for sure is there is a huge RF garbage on the entire
spectrum
which is not subject to any FCC rule.

Borrow a spectrum analyzer in the 9KHz-10GHz range and see with your eyes.

good luck!


On Sun, Oct 18, 2015 at 9:55 PM, Tom <tbotker@msn.com> wrote:

> Vasile,
>
> Do you know if you do a one off is the regulations still apply?
>
> Thanks,
> Tom
>
> -----Original Message-----
> From: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] On Behalf
> Of
> embedded systems
> Sent: Wednesday, August 26, 2015 3:03 PM
> To: Microcontroller discussion list - Public.
> Subject: Re: [PIC] ,oe frequency RC oscillator
>
> Do you manufacture in large series?
> For small number of things you don't need any approval. See the Chinese
> stuff...
>
> Vasile
>
> On Wed, Aug 26, 2015 at 7:45 PM, Ian Thompson-Bell <ianbell@ukfsn.org>
> wrote:
>
> > I recently read an article that said devices with clock frequencies
> > below 9KHz do not need FCC or European EMC emissions approvals. I have
> > a number of non-critical applications that could run at a clock
> > frequency of say 8KHz.
> > Are
> > PICs with RC oscillators viable at this low a frequency? Are there any
> > special issues I should be aware of?
> >
> > Cheers
> >
> > Ian
> >
> > --
> > http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
> > View/change your membership options at
> > http://mailman.mit.edu/mailman/listinfo/piclist
> >
> --
> http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
> View/change
> your membership options at http://mailman.mit.edu/mailman/listinfo/piclis=
t
>
> --
> http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>
--=20
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.