Art - you might be interested to know that LTSpice works very well under WINE in Linux. Sean On Sat, Oct 10, 2015 at 9:29 AM, Art wrote: > I used LTSpice, which is free and first rate. Although it is a fully > capable Spice simulator, the libraries are fantastic. I switched to Linux > in 2011, so haven't used it since then. > > I'm curious, does your customer need to originate a drawing himself, or > will he just need to make mods to your supplied drawings? If you supply t= he > original drawings, then modifications by the user are quite simple. > > I also had good luck with a pcb drawing schematic offered by several > offshore custom pcb manufacturers. They require the schematic be entered > first, then the user can drag etches to do the layout of pcb traces. They > have generic boxes for chips where you can change number of pins, chip na= me > etc. I don't remember the name of the vendor, but I got mine from a custo= m > pcb manufacturer in India. You can export the project without actually > doing the pcb layout, which means you can use it without having to enter > chip numbers/package types. > > > AG > > > Anyone have a recommendation for a simple, decent wiring-diagramming > > software package? I'm looking for something that will let me draw > > rectangles to represent modules and connectors, and have *multiple* > > wires coming off each of these, each with a different color, and label. > > Something like this (though I don't need the switch/coil symbols inside > > the rectangles) > > -- > http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive > View/change your membership options at > http://mailman.mit.edu/mailman/listinfo/piclist > --=20 http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist .