You might check into a service bureau to do this, depending on the quantity=
..  I have a run of another vendors processor, looking at about 3K of them, =
I was quoted .35 ea including putting them back on the reel after.  Conside=
ring time is money, and I just programmed 200 of them by hand, that's a pre=
tty good deal.

-----Original Message-----
From: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] On Behalf Of=
 Mark Scoville
Sent: Wednesday, August 12, 2015 5:36 AM
To: piclist@mit.edu
Subject: [PIC] Gang programmer recommendation

Hi All,

Looking for a gang production programmer to do 4 or more PICs at a time.
Unit would mainly see 12F508 DIPs, and a few other DIP package 16F and 18F =
parts.

Anyone have experience with some of the offerings out there? Thanks for any=
 advice.

-- Mark
--
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive View/chang=
e your membership options at http://mailman.mit.edu/mailman/listinfo/piclis=
t

________________________________

PLEASE NOTE: The information contained in this electronic mail message is i=
ntended only for the use of the designated recipient(s) named above. If the=
 reader of this message is not the intended recipient, you are hereby notif=
ied that you have received this message in error and that any review, disse=
mination, distribution, or copying of this message is strictly prohibited. =
If you have received this communication in error, please notify the sender =
by telephone or e-mail (as shown above) immediately and destroy any and all=
 copies of this message in your possession (whether hard copies or electron=
ically stored copies).


--=20
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.