thank you again, soluted by you.

On Thu, Jun 4, 2015 at 10:51 PM, David Duffy (AVD) <
david@audiovisualdevices.com.au> wrote:

>  From the data sheet:
>
> This interrupt can wake the device from Sleep. The user, in the
> interrupt service routine, can clear the interrupt in the following manne=
r:
>
> a) Any read or write of PORTB. This will end the mismatch condition.
> b) Clear flag bit RBIF. A mismatch condition will continue to set flag
> bit RBIF.
>
> Reading PORTB will end the mismatch condition and allow flag bit RBIF to
> be cleared.
>
> On 4/06/2015 10:07 PM, Murat Seven wrote:
> > Hi,
> >
> > Why RBIF not clearing?
> >
>
> --
> ___________________________________________
> David Duffy        Audio Visual Devices P/L
> Unit 8, 10 Hook St, Capalaba 4157 Australia
> Ph: +61 7 38235717      Fax: +61 7 38234717
> Our Web Site: www.audiovisualdevices.com.au
> ___________________________________________
>
> --
> http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>
--=20
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.