>
>
>I'm assuming that the hub/router has a DHCP server, you plug in a laptop/P=
C to set it up using its built in web server. Supposedly I can set the PICD=
EM.net board as a fixed IP address and I tried turning off the DHCP option =
in the configuration file and reprogrammed the board but after that I could=
n't access the web pages. I then tried to restore the board by reflashing w=
ith the pre-compiled hex file, sadly that doesn't work either. When the boa=
rd boots up it shows an IP address xxx.xxx.1.1, when plugged in to the lapt=
op that changes to xxx.xxx.xxx.xxx so it seems to be acquiring an address.=
=20

You know the MAC address for the PIC board.
Wireshark the setup and see what it is doing.

>I thought this would be a fairly quick exercise but now it seems like it i=
s going to need a lot of learning so I will have to shelve it for now.
>Thanks
>James
> 		 	   		 =20
>--=20
>http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
>View/change your membership options at
>http://mailman.mit.edu/mailman/listinfo/piclist

--=20
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.