> Unfortunately not... for external input, FOSC<2:0> is 010

It looked possible. No doubt you've gone through the d/s more
thoroughly than my casual glance.

Joe

6.2.1.1

EC mode has three power modes to select from through
Configuration Words:

.. High power, 4-32 MHz (FOSC =3D 111)
.. Medium power, 0.5-4 MHz (FOSC =3D 110)
.. Low power, 0-0.5 MHz (FOSC =3D 101)

6.2.1.4 4x PLL

The oscillator module contains a 4x PLL that can be
used with both external and internal clock sources to
provide a system clock source.

The Electrical Specifications appear to disagree with the
previously stated '32MHz'

TABLE 31-1: CLOCK OSCILLATOR TIMING REQUIREMENTS

DC - 20 MHz EC Oscillator mode (high)

Only in TABLE 31-3: PLL CLOCK TIMING SPECIFICATIONS is there
mention of 32MHz, but I could probably be skipping detail again

Usually I start hmmming when the d/s isn't consistent


-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2015.0.5863 / Virus Database: 4321/9474 - Release Date: 04/06/15

--=20
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.