http://www.iowacitylist.com/Industrial-Equipment-/Heavy-Industrial-/5FT-50K= V-18AWG-red-high-voltage-wire-cable-stranded.HTM On Fri, Apr 3, 2015 at 10:04 PM, David VanHorn wrote: > Flyback wire would be hard to come by today, and as I remember it was sti= ff > as a board. > > Tried to find spark plug wire today, no go. It's kits or nothing. > > I am going to try some silver teflon wire in two layers of silicone tubin= g > and see how that does. > If I can deliver 60kV with the leakage, I'm ok. > > On Fri, Apr 3, 2015 at 12:56 PM, wrote: > > > > > Spark plug wire? > > > > > > Ultor wire ? > > > > > > Or add layers of heat-shrink to a multi-strand cable > > > > I was thinking EHT wire from cathode ray tube systems, such as TVs. > > Probably harder to obtain than spark plug wire (but it might be the sam= e > > stuff too) as it is solidly built into the EHT transformer to stop coro= na > > problems at that end. > > > > -- > > http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive > > View/change your membership options at > > http://mailman.mit.edu/mailman/listinfo/piclist > > > -- > http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive > View/change your membership options at > http://mailman.mit.edu/mailman/listinfo/piclist > --=20 http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist .