For LED strips you don't need conductive epoxi. The LED is soldered on a flexi PCB board, usually with 3M double side tape on the back, it can be soldered as any component. Most of them has the choice of cutting in pieces at every three LEDs or so or to chain as well. Good damn invention! Vasile On Fri, Feb 27, 2015 at 4:12 AM, Robert Dvoracek wrote: > It sounds like these boards may have aluminum traces or something. > Conductive epoxy would probably work, but $0.75 per connector is hard to > beat. > > Cheers, > Robert > > ---------------------------------------- > > Date: Thu, 26 Feb 2015 19:19:26 -0600 > > From: mechanic_2@charter.net > > To: piclist@mit.edu > > Subject: Re: [OT] LED STRIP LIGHTS SOLVED > > > > Bob, > > I agree with you. I wouldn't be surprised to learn that the > > equipment to do the soldering costs $50K or more. Do you have a part > > number for the connector and the LED strip that you are using? What is > > the name of the company that makes these strips? > > Thanks, > > rich! > > > > On 2/26/2015 7:12 PM, BOB wrote: > >> not too sure what is going on with them and their SPECIAL tools but th= e > >> connectors are only $ 0.79 each and I do not think that I can solder > >> them for that price. > >> > >> Bob > >> > >> > >> On 2/26/2015 5:47 PM, IVP wrote: > >> > > > > -- > > http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive > > View/change your membership options at > > http://mailman.mit.edu/mailman/listinfo/piclist > > -- > http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive > View/change your membership options at > http://mailman.mit.edu/mailman/listinfo/piclist > --=20 http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist .