Cautious use of acetone will do the trick. It dissolves everything and leaves no residue. Just go easy as it will likely dissolve or damage other parts of the strip. MIKE On Feb 24, 2015 10:04 AM, "BOB" wrote: > I have wanted to do some things with the LED strip lights. > The problem I am having is after I cut them to length trying to solder > power leads to them. > the ones I am using are the ones with the adhesive on the back and I > have not found a way to get the adhesive off and cleaned so that I can > solder wires to the foil leads. > > I have tried but I am having one of those senior moment days where I am > not able to think clearly. > > Bob > -- > http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive > View/change your membership options at > http://mailman.mit.edu/mailman/listinfo/piclist > --=20 http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist .