On 2/20/2015 5:21 PM, Dwayne Reid wrote:
> At 03:02 PM 2/20/2015, Josh Koffman wrote:
>> And how about an LED indicator on MCLR/RE0. Good or bad idea? Seems
>> like it should be ok, but I wanted to check to be sure.
> I haven't used this particular PIC but on the PICs that I do use
> (PIC16F family), MCLR is input only.  It won't drive a LED.  But: you
> can simply swap one of your switches onto MCLR if needed.  Again, the
> series resistor will isolate the pin from your switch.
>
> dwayne
>

I can confirm for this specific device (18F25K22), that MCLR is an input=20
only.

Cheers,
-Neil.

--=20
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.