> From: Neil <picdude3@narwani.org>
> Subject: [EE] Automotive power surge fix?

> Recently got and old car roadworthy and it has HID headlights in it. =20
> The bulbs have an interesting behaviour in that when first turned on,=20
> they emit a quick flash of light, then instantly dim, and slowly=20
> brighten back up to operating brightness.  What's not good is that every=
=20
> so often, that initial flash causes enough of a power surge to knock out=
=20
> the ECU (=20
> http://www.wmsracing.com/wmsweb/SDS-WMS-SDS-Digital-Injection-System.html=
 ). =20
> Or perhaps it's knocking out the aftermarket ignition system (=20
> http://www.jegs.com/i/MSD/121/62152/10002/-1 ), as after the surge, the=20
> ECU shows "RPM error".  I'm planning on adding some type of filter to=20
> the ECU or ignition module power lines (no prob with that), but=20
> wondering why I shouldn't try to reduce the surge instead.
>=20
> How would I go about doing this?  The HID lights have the bulbs, a relay=
=20
> module and a couple ballasts.  Would there be a simple way to reduce the=
=20
> surge for bulbs like this?  Or would doing so impede the bulbs operation?
>=20
> Cheers,
> -Neil
>=20
Have any of these items been automotive qualified? I would ask jegs and WMS=
 how they handle transients. Maybe a big cap on the HID supply would help i=
f its a supply dip. Have you looked around with a scope? Aftermarket ECUs o=
ften don't have an RF suppression 'barrier' so it could be a burst from the=
 HID inverter as it fires up.
James

 		 	   		 =20
--=20
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.