I am an English speaker and I missed it too.

Allen

> -----Original Message-----
> From: piclist-bounces@mit.edu [mailto:piclist-
> bounces@mit.edu] On Behalf Of Isaac Marino Bavaresco
> Sent: Thursday, February 12, 2015 9:20 AM
> To: Microcontroller discussion list - Public.
> Subject: Re: Fwd: Re: [EE]:: Prototype pick & place
machine -
> DIY/Kitset ... $US1200
>=20
> ???
>=20
> I'm not a native English speaker, so perhaps I missed the
joke.
>=20
>=20
> Isaac
>=20
>=20
>=20
> On 12/02/2015 09:36, drc wrote:
> >   When do you want to come over? I have nothing going on
> except possibly
> > a bicycle ride Friday afternoon.
> >
> > Dale
> >
> > On 02/12/2015 04:41 AM, Isaac Marino Bavaresco wrote:
> >> Some may have missed my post, posting again...
> >>
> >> On 08/02/2015 07:53, Mike Harrison wrote:
> >>> On Sun, 8 Feb 2015 20:28:11 +1300, you wrote:
> >>>
> >>>> This appears close to awesome.
> >>>> Just getting to market now - first production run
available
> shortly AFAICS.
> >>>>
> >>>> "Proper" pick and place with optical recognition of
> components,
> >>>> orientation, component "bins"*, fiducials, board
> dimensions etc.
> >>> It's not a "proper" P&P without proper feeders.
> >>> It's no quicker than manual placing, plus you have the
> setup time.
> >>>
> >>> Very limited usefulness IMO
> >> "Proper" feeders are very expensive.
> >> This machine <http://www.aliexpress.com/item/Good-
> Quality-SMT-Pick-and-Place-Machine-Pick-Place-Machine-
> CHMT36/32265399313.html>
> >> uses a clever solution that gives the benefits of
"proper"
> feeders (except for some loss of performance, which is
totally
> acceptable) with almost zero cost.
> >>
> >> Isaac
> >>
> >>
> >>
>=20
> --
> http://www.piclist.com/techref/piclist PIC/SX FAQ & list
> archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist

--=20
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.