Robert,
     I was curious. I appreciate it. It is going to be a noisy night. We=20
have six inches of heavy wet snow on the roof. The temperature is high=20
enough that the snow is melting and sliding off of the roof. Every time=20
some slides off, it goes ka womp on to the ground. Very loud.
Thanks,
rich!

On 2/7/2015 10:19 PM, Robert Dvoracek wrote:
> ----------------------------------------
>> Date: Sat, 7 Feb 2015 22:13:06 -0600
>> From: mechanic_2@charter.net
>> To: piclist@mit.edu
>> Subject: Re: [EE] N Channel MOSFETs...again
>>
>> Robert,
>> I have a question. Since these are protection diodes won't the FET
>> be blown if you leave them out and it turns out that your design needs t=
hem?
>> Thanks,
>> rich!
> Yes, it very well could.
> That is why testing and experimentation is so important, especially oscil=
loscope testing to look for those transients.
>
> Cheers,
> Robert 		 	   	=09

--=20
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.