At 04:24 PM 1/7/2015, Charles Craft wrote: >Do you have a picture showing the back side of the micro-USB connector? >How painful is that to align and solder? >The chargers typically only have power and ground so a solder bridge=20 >is not an issue? Chargers generally have voltage dividers on the USB data pins to let=20 the phone or whatever how much current is available for charging. As=20 far as I know, you can short those pins to either ground or plus rail=20 without ill effects. I just wanted to alert you to the fact that=20 most chargers do indeed use those pins (as opposed to letting them float). dwayne --=20 Dwayne Reid Trinity Electronics Systems Ltd Edmonton, AB, CANADA (780) 489-3199 voice (780) 487-6397 fax www.trinity-electronics.com Custom Electronics Design and Manufacturing --=20 http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist .