I can and did before, but it always seemed a bit messy. Apart from the timer you also need to take into account instructions time and such. Need 1uS resolution. Best Regards Luis On 2 Jan 2015 16:41, "Neil" wrote: > Any reason you can't create your own PWM using a timer interrupt? > > Cheers, > -Neil > > > On 1/2/2015 7:22 AM, Luis Moreira wrote: > > Hi Guys, > > need a 8 pin PIC that ideally would have 2 PWM but must have SPI, found > > PIC12F1822 and PIC12F1840 but they only have one PWM. > > I am driving one single rc servo but requirements may change to need to > > drive the motor directly with an H - bridge. > > Any info on these two micros regarding any problems encontrered or any > > other device that would fit the bill would be apreciated. > > Best Regards > > Luis > > -- > http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive > View/change your membership options at > http://mailman.mit.edu/mailman/listinfo/piclist > --=20 http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist .