Good day to all. I have a project where it is desirable that the chassis-mount BNC=20 connectors are fully insulated. By that, I mean the the entire=20 outside shell is non-conductive. Even the bayonet locking pins are plastic= .. I've seen these before, made of some form of white plastic and my Tek=20 THS720P has similar connectors, except black in color. But my=20 searches so far are coming up blank. Looking inside the connector, you see the standard center spigot with=20 female pin inside and around the inside periphery of the outside=20 sleeve, you see a metal ring at the bottom that engages with the=20 shield on the BNC plug. But the entire outside sleeve is made of=20 some form of plastic and is thus non-conductive. Any supplier or part numbers greatly appreciated. Many thanks! dwayne --=20 Dwayne Reid Trinity Electronics Systems Ltd Edmonton, AB, CANADA (780) 489-3199 voice (780) 487-6397 fax www.trinity-electronics.com Custom Electronics Design and Manufacturing --=20 http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist .