If you run a few simple instructions and time them
you should be able to find out the correct setting.
That is, the setting that gives a correct time.

Jan-Erik.

Justin Richards wrote 2014-12-12 12:37:
> I wish to use the stopwatch while experimenting with Olimex
> PIX_MICRO-WEB embedded ethernet PIC18F67J60 which has a 25MHz external
> xtal and a OSCTUNE value of 0x40 which produces a clock freq of
> 41.667MHz.
>
> I am not sure which value which value to enter in the Processor
> Frequency input box.
>
> As it is titled  Processor Frequency and not Clock Freq I am leaning
> towards 41.667/4 MHz. ~ 10.41675Mhz.
>
> However, I am not 100% sure if the simulator takes into account the
> OSCTUNE value or if it is actually asking for the clock freq.
>
> (still) using MPLAB IDE 8.33 (X seemed a bit overwhelming) debugging
> with MPLAB SIM and  pickit2.
>
> Justin
>
--=20
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.