I'm needing to detect ten external interrupts from pulses that can be
very short so I won't be able to respond to a port-wide interrupt fast
enough to poll the port for the interrupting pin or pins.=20

I could use a one-shot or buskeeper circuit with diode before it but if
I could find a micro that had separate interrupt vectors or built-in pin
hold I could reduce parts count.

At this point I am planning to use a buskeeper circuit and port-wide
interrupts, poll the pins, then turn the pins into outputs and clear the
buskeepers.

Any other ideas would also be welcome!

Thanks, Bob

--=20
http://www.fastmail.com - Email service worth paying for. Try it for free

--=20
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.