Could you do a mechanical drawing in something like Solidworks, or Inventor, and have someone 3D print one for you. If it works, you could have some custom made. Or if the volume in't too high, you ould have them printed for you. Just a thought. Regards, Jim > -------- Original Message -------- > Subject: [EE] Plastic Enclosures > From: David VanHorn > Date: Wed, November 12, 2014 8:22 am > To: "Microcontroller discussion list - Public." >=20 >=20 > I'm not finding what I need, hopefully someone can help. >=20 > I am looking for a supplier like pactec or bopla that has something vague= ly > pistol shaped, two part plastic enclosure. >=20 > Bigger than 1.5" ID in the top section but I can be flexible. >=20 > Space for a trigger control (bonus points if the switch and plastics are > included) > Space for controls on the back end, pots or display and buttons. >=20 > This is the best I've found, but I would prefer the top part to be more > tubular than triangular. > http://www.okwenclosures.com/products/okw/senso.htm >=20 > Any ideas? > --=20 > http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive > View/change your membership options at > http://mailman.mit.edu/mailman/listinfo/piclist --=20 http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist .