Always a problem, Interested what others come up with Northern Technology C88E600000 or N30E900000 FPHGR-1AE 974-009-020R121 Let us know what your finalists are D On 25 October 2014 08:53, Neil wrote: > I'd really like to have a hood for neatness, and because I really don't > want it exposed in a car. No IDC because the wires from one connector > don't directly mate to another 1-1... ie: wires go to different pins. > > Cheers, > -Neil. > > > On 10/25/2014 8:33 AM, peter green wrote: > > Neil wrote: > >> Hi all, > >> > >> Anyone know where I can find sub-D/DB connectors (9-25 pin) with very > >> low-profile hoods? The "standard" ones I have take a total of 2" (ie" > >> requires 2" or clearance outside of the device it's plugged into) and > >> that's making a project painful. This is a personal project (ECU in a > >> car), so I can fabricate or 3D print something if required, but really > >> would just like to get something off the shelf. > >> > > Do you actually need a hood at all. > > > > Have you considered crimp or IDC type D connectors where the bare metal > > of the pins is not exposed even without a hood? > > -- > http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive > View/change your membership options at > http://mailman.mit.edu/mailman/listinfo/piclist > --=20 http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist .