Are you sure?  I just checked and see my tickets plus there's still an=20
"Add A Ticket" button.  Sadly however, Microchip's pretty good support=20
is fading to the point of being useless -- no response for several days,=20
then asking for a followup yields the "we'll get back to you" answer, etc.

But that's still better than TI's support, right?

Cheers,
-Neil.



On 10/9/2014 8:58 PM, Isaac Marino Bavaresco wrote:
> What happened toMicrochip's support? I tried to open a ticket with the
> technical support but it appears that now there is only "Comunity
> Support" (forum).
>
>
> Below is a copy of the question I posted in the forum. Any ideas?
>
>
> Best regards,
>
> Isaac
>
>
>> I'm porting my RTOS from PIC32MX to PIC32MZ and i'm experiencing weird
>> problems in the MPLAB-X simulator.
>>  =20
>> Currently I'm using no shadow register sets, but when the Timer2
>> interrupt service routine begins the shadow set 1 is automatically
>> selected.
>>  =20
>> I have:
>>  =20
>> PRISS =3D 0x00000000
>> SRSMAP =3D 0x00000000
>> SRSMAP2 =3D 0x00000000
>>  =20
>> Before the interrupt triggers, SRSCtl =3D 0x1C000000 but at the ISR
>> entrance, SRSCtl =3D 0x1C040001.
>>  =20
>> That's weird because all the other interrupts behave correctly.
>>  =20
>> TIMER1 and TIMER2 have interrupt priority =3D 1 (T1IP =3D 1, T1IS =3D 0,
>> T2IP =3D 1, T2IS =3D 0)
>> UART2 has interrupt priority =3D 2 (U2RXIP =3D 2, U2RXIS =3D 0, U2TXIP =
=3D 2,
>> U2TXIS =3D 0)
>>  =20
>> Both Timer1 and Timer2 share the exact same priority, then I would
>> expect both to use the same shadow register set (in this case, the
>> original set). Timer1 uses the original set but Timer2 unexpectedly is
>> using shadow set 1. UART2 has a different priority and also uses the
>> correct set.
>>  =20
>> I hope this is a bug in the simulator, because things will be much
>> harder if this bug occurs when debugging the real hardware.
>>  =20
>> Does anybody have any hint? Am I missing some configuration? Can
>> anybody confirm that this is a bug in the simulator?
>>  =20
>>  =20
>> Best regards,
>>  =20
>> Isaac
>
>

--=20
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.