I realize that.  I don't want to use the programmer.  I want to use the
In Circuit Debugger.
 How do I get it to work with my hex code?

Regards,

Jim

> -------- Original Message --------
> Subject: Re: [PIC]: Is it possible to use the Mikroelektronika MikroICD
> on the Easy PIC6 board with MPASM
> From: Vicent Colomar Prats <vicentecolomar@gmail.com>
> Date: Fri, October 03, 2014 12:54 am
> To: "Microcontroller discussion list - Public." <piclist@mit.edu>
>=20
>=20
> The programmer sends code to Pic. It is not about Assembler or C. It is t=
he
> compiler who takes the code and converts to an hex file, then you send to
> the Pic thru the programmer.
>  El dia 02/10/2014 23.17, <jim@jpes.com> va escriure:
>=20
> >
> >  All,
> >
> >  Does anyone know if the onboard MikroICD on the EasyPIC6 development
> > board can be used
> >  with PIC assembly code?
> >
> >  If so, what is required?  And how is it used?
> >
> >  Please advise.
> >
> >
> >  Thanks and Regards,
> >
> >   Jim
> >
> >
> > --
> > http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
> > View/change your membership options at
> > http://mailman.mit.edu/mailman/listinfo/piclist
> >
> --=20
> http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist

--=20
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.