James and all,
     I got it. I had to change the configuration fuse from XT to HS.=20
There wasn't enough drive for the crystal. Thanks for letting me use you=20
guys for a sounding wall. Sometimes you just need to talk to someone=20
about a problem. It is now running at 20.002066 MHz +- 1 Hz.
Much appreciated,
rich!

James,
     It won't run at all. Of course I'm build on a breadboard right now=20
and they are terrible about having a lot of stray capacitance. It=20
probably won't run until I get it built on to a regular circuit board.=20
What do you think?
Thanks,
rich!

On 7/31/2014 8:09 PM, James Cameron wrote:
> If you have stray capacitance where you want it, don't forget to check
> for stray capacitance where you don't want it.
>
> Does the crystal oscillate, or does the part not function?
>

--=20
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.