What about reed relays........, bundle eight with heatshrink tube and wrap
some wire coil round the lot
Does need eight per cable though....

PC=20

-----Original Message-----
From: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] On Behalf Of
Josh Koffman
Sent: 19 July 2014 04:28
To: Microcontroller discussion list - Public.
Subject: Re: [EE] Network Switch

On Tue, Jul 15, 2014 at 2:24 PM, Sean Breheny <shb7@cornell.edu> wrote:
> If you do this with relays, I believe it would work but you want to make
> sure you get low capacitance relays, like RF-switching relays. Otherwise,
> they might still allow signal propagation in some cases when open (or for
> the DPDT case, they might allow crosstalk between the two selectable
> signals).

--=20
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.