Jan-Erik,
     I forgot something. Now that it compiles with no errors and just=20
the warning that the paid for version will make smaller code how do I=20
use the interrupt code? I.E. Where do I put this:

void Interrupt(){
     if (PIR1bits.TMR1IF){
       PIR1bits.TMR1IF =3D 0;
       TMR1H     =3D 0x0B;
       TMR1L     =3D 0xDC;
       //Enter your code here
     }
}

Thanks,
rich!

On 7/19/2014 1:10 PM, Jan-Erik Soderholm wrote:
> Either:
>
> PIR1bits.TMR1IF =3D 0;
>
> or simply:
>
> TMR1IF =3D 0;
>
> The bit struct definition is on the register
> level (PIR1), not on the bit level (TMR1IF).
>
> Jan-Erik.
>
>
>
>
> Richard R. Pope wrote 2014-07-19 19:40:
>> Allan,
>>        I'm using the MicroChip XC8 compiler. I just looked through the
>> macros in the pic16f684 include file and the code should work. Would you
>> please take a look at this code section? The values that are being
>> flagged are the TMR1IF_bit and TMR1IE_bit definitions. Here is the code
>> with the flagged sections commented out:
>>
>> void InitTimer1(){
>>      T1CON     =3D 0x31;
>>      PIR1bits.TMR1IF =3D 0;
>>      TMR1H     =3D 0x0B;
>>      TMR1L     =3D 0xDC;
>>      TMR1IE     =3D 1;
>>      INTCON     =3D 0xC0;
>> }
>>
>>         I can't see what is wrong as these definitions are in the includ=
e
>> file. With these statements commented out the code compiles.
>> Thanks,
>> rich!
>>

--=20
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.