Hello all,
     I'm making progress but I have gotten stuck at this point. Could I=20
please get some help? This compiles but when I try to call the delay=20
function I get error codes that I am re-declaring the delay function. I=20
can't figure out why. I have tried different names such as 'delay1 and=20
delay11'. I still receive the same error message. Could someone please=20
take a look and see what I am doing wrong? I am using 8.9x but I didn't=20
have to make any modifications to another program that I compiled under=20
version X.
Thanks,
rich!

#include <pic16f684.h>

/*Richard R. pope
  08-02-13
  */

#pragma config FOSC =3D XT, WDTE =3D OFF, PWRTE =3D ON, MCLRE =3D OFF \
         CP =3D OFF, CPD =3D OFF, BOREN =3D OFF, IESO =3D OFF, FCMEN =3D OF=
F
main()
{

     PORTA =3D 0;            //    Turn porta off
     TRISA =3D 255;        //    Set Porta as all inputs
     PORTC =3D 2;            //    Set RC1 to RC5 high
     TRISC =3D 193;        //    Start with DP1 on, the rest of portc is=20
inputs
     CMCON0 =3D 7;         //  Turn off Comparators
     ANSEL =3D 16;         //  Set RC0/AN4 as analog

// Define commands
     int Reset =3D 34;
     int Gate =3D 18;

while (1 =3D=3D 1)            //    Loop forever
     {
         TRISC =3D Reset;        //    Clear the Display
         TRISC =3D Gate;        //    Start counting
Notice that these function calls are commented out!!!!!!!!!!!!!
         //delay(1);            // Count the frequency for one second =3D H=
Z
         //delay(15);            // Display the frequency for 15 seconds

     }
}    //  End NewControlCode.c

void delay(int time)
{
     int x;
     for(x=3D0; x <=3D time * 10; x++);
     return;
}
--=20
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.