Joe,
     That is true. Setup a clock the can output a high for one second on=20
demand. Read the POT, output the reset pulse, turn on the one second=20
clock that corresponds to the setting of the POT, and do it all over=20
again. Is that correct?
Thanks,
rich!

On 7/18/2014 2:56 AM, IVP wrote:
>> I could figure out MPASM but MP C would be much easier
> It should be simple enough in asm
>
> So far there are only a few basic functions - get the clock going,
> read the pot and do something with the result
>
> It's not as though the PIC needs to do a lot of calculations for
> example, it's just reacting and supervising
>
> Joe

--=20
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.