Reprintable circuits! Imagine a tray you drop all the circuit in(3d print) then you print wax isolation and conductive (soon superconductive) traces! And when you want another circuit you melt and start over! Talking Open source FPGA Processing in Memory Parallel Simultaneous Flow Object Engines in Renewable Powered Mobil Electrodynamic Modules - housing - transporting - flying contraptions - Printed at home 8D it'll happen if we don't Atlantis first ;) ---------- Forwarded message ---------- From: "Vicent Colomar Prats vicentecolomar@gmail.com [Homebrew_PCBs]" Date: Wed, 16 Jul 2014 12:51:42 +0200 Subject: [Homebrew_PCBs] Squink - The conductive ink printer To: "Homebrew_PCBs@yahoogroups.com" Wow, have you seen this? https://www.kickstarter.com/projects/botfactory/squink-the-personal-electro= nic-circuit-factory Never heard about the conductive glue, but it sees to work pretty well. 10 mils is not bad, It will be perfect to me when they get 6 mils resolution, vias and multilayer, but it is a very interesting beggining. It also has pick and place! I really liked it, it's the future for amateur and hobby. I'm not going to spend more than $3000 on it, but I hope this can get cheaper and better in a near future. --=20 Tobias Gogolin Tel. D1 (49) 0151 5187 5210 Tel. D2 (49) 0152 0839 5060 skype: moontogo messenger: usertogo@hotmail.com You develop Sustainable Ranch Technology at http://tech.groups.yahoo.com/group/SURA-TECH an Open Source Electric Motor/Alternator at http://groups.yahoo.com/group/Performance_Axial_Flux and an Open Source Motor Controller at http://groups.yahoo.com/group/GoBox --=20 http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist .