Evaluation board
    3 axis magnetometer
    3 axis accelerometer
    50-110 kPa pressure sensor *

With drivers for Raspberry Pi, Freedom, Arduino.

$NZ14.80/1 Farnement 14  ($13 US)

Note no gyro.

NZ page
http://nz.element14.com/freescale-semiconductor/xtrinsic-sense-board/mems-s=
ensor-evaluation-add-on-board/dp/236535302?Ntt=3D236535302&CMP=3Di-55c5-000=
02255


E14 technical page http://www.element14.com/community/docs/DOC-65084
Shown as $?US?22




   - Raspberry Pi compatible connector, (drivers available)
   - Freescale Freedom KL25Z compatible connector, (drivers available)
   - Arduino compatible footprint (drivers available)
   - MPL3115 - High-Precision Pressure Sensor [50 to 110kPa, 2.5v]
   - MAG3110 - Low-power 3D Magnetometer
   - MMA8491Q - 3-Axis, Digital Accelerometer


    User Manual/Guide element14: User Guide for XTRINSIC-SENSE Board
   <http://www.element14.com/community/docs/DOC-65488/l/element14-user-guid=
e-for-xtrinsic-sense-board>
Data
   SheetFreescale: Datasheet for Xtrinsic MAG3110 High Accuracy 3D
   Magnetometer
   <http://www.element14.com/community/docs/DOC-52277/l/freescale-datasheet=
-for-xtrinsic-mag3110-high-accuracy-3d-magnetometer>
Data
   SheetFreescale: Datasheet for Xtrinsic MMA8491Q 3-axis Accelerometer
   <http://www.element14.com/community/docs/DOC-54565/l/freescale-datasheet=
-for-xtrinsic-mma8491q-3-axis-accelerometer>
Data
   SheetFreescale: Datasheet for Xtrinsic MPL3115A2 Smart Pressure Sensor
   <http://www.element14.com/community/docs/DOC-54566/l/freescale-datasheet=
-for-xtrinsic-mpl3115a2-smart-pressure-sensor>
Quick
   Start GuideFreescale: Quick Start Guide for FRDM-KL25Z Freedom
   Development Board
   <http://www.element14.com/community/docs/DOC-49219/l/freescale-quick-sta=
rt-guide-for-frdm-kl25z-rev-1>
--=20
http://www.piclist.com/techref/piclist PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.